全自动门窗扇打胶机
Your current location : Home >> Products >> Inner lamination of vertical insulating glass production line

Contact UsContact Us

Jinan Zhensheng CNC Equipment Co., Ltd

Contact person: Manager Zhang

Mobile: 13953184531

Tel: 0531-84895580

Fax: 0531-84895580

Email: 413496595@qq.com

website: www.jnzssk.com

             en.jnzssk.com

Address: South Industrial Park, zhengjiadian village, meilihu street, Jinan City

Insulating glass production line

2021-02-22 16:00:59
times
Insulating glass production line
Details:

中空玻璃生产线

The difference of insulating glass production line. In the fifth paragraph, the inner harmony, the outer harmony and the inner harmony began to change. The fifth section is the transition section, while the fifth section is the key section, which is the combination section. This section is used for insulating glass lamination, the movable plate is controlled by the hydraulic system, and the forward and backward movement parameters are controlled by the travel switch on the fixed frame; when the front glass reaches the photoelectric switch at the end of this section, the glass decelerates, and the side positioning rises at the same time, and the glass stops when it reaches the side positioning. At this time, the movable plate moves backward and stops when it touches the backward travel switch. When the photoelectric switch 1 on the crossbeam detects the second piece of glass, the crossbeam slows down and moves down; when the photoelectric switch 2 on the crossbeam detects the second piece of glass, the crossbeam stops moving down; the second piece of glass is transported forward through the undercutting, the cone wheel on the crossbeam and the stick on the movable plate; when the photoelectric switch on the end of the crossbeam detects the second piece of glass, the second piece of glass is transported forward The two pieces of glass decelerate to the side position; the bottom is lifted and moved down to reset, and the beam moves up and stops when it touches the travel switch; generally speaking, when the insulating glass production line is in the first few pieces of production, step on the foot switch to press the cylinder belt pressing roller to press the two pieces of glass together, and at the same time transport the insulating glass to the pressing section; check the glass lamination condition, and if the glass lamination is good, directly hit the glass lamination Automatic on (do not step on the foot switch), so repeatedly.


Recent browse: